Specifications

1-21
Catalyst 4224 Access Gateway Switch Software Configuration Guide
OL-2031-02
Chapter 1 Product Overview
Configuration Guidelines
DHCP pool configuration commands:
client-identifier Client identifier
client-name Client name
default-router Default routers
dns-server DNS servers
domain-name Domain name
hardware-address Client hardware address
host Client IP address and mask
option Raw DHCP options
C4224_SF(dhcp-config)# option 150 ip ?
Hostname or A.B.C.D Server's name or IP address
Note DHCP option 150 is supported locally. This local support provides the IP address
of the TFTP server, which has the IP phones’ configuration. An ip
helper-address would not be required in this case because the IP phone has its IP
address and the TFTP server address. The configuration request to the TFTP
server is a unicast packet.
Voice Port Configuration
You configure voice ports on the Catalyst 4224 as you would in standard
Cisco IOS software. The following sample configuration shows a configuration
for the eight-port FXS Module:
dial-peer voice 41 voip
destination-pattern 1...
session target ipv4:172.20.73.13
codec g711ulaw
!
dial-peer voice 1005 pots
destination-pattern 1005
port 4/0