Specifications

Chapter 1 Product Overview
Configuration Guidelines
1-18
Catalyst 4224 Access Gateway Switch Software Configuration Guide
OL-2031-02
Configuration Guidelines
This section provides platform specific guidelines for configuring the
Catalyst 4224.
This section contains the following topics:
• Default Port Configuration, page 1-18
• Separate VLAN for Voice and Data, page 1-19
• Port Configuration for a Single Subnet, page 1-19
• InterVLAN and WAN Routing Configuration, page 1-20
• Centralized Cisco CallManager and DHCP Server, page 1-20
• Voice Port Configuration, page 1-21
• Interface Range Command Support, page 1-22
• Switched Port Analyzer (SPAN), page 1-22
For Voice over IP (VoIP) configuration examples, see the following section in
this manual:
Appendix C, “VoIP Configuration Examples”
Default Port Configuration
The Catalyst 4224 boots up as a Layer 2 switch. The following sample
configuration shows a default port configuration.
C4224_SF# sh run int fas5/7
Building configuration...
Current configuration : 96 bytes
interface FastEthernet5/7
no ip address
duplex auto
speed auto
snmp trap link-status
end