Specifications

Appendix A Command Reference for Voice VLAN
switchport access
A-8
Catalyst 4224 Access Gateway Switch Software Configuration Guide
OL-2031-02
Defaults
The Port Fast feature is disabled; however, it is automatically enabled on
dynamic-access ports.
Command Modes
Interface configuration.
Usage Guidelines
This feature should be used only on ports that connect to end stations. It affects
all VLANs on the port.
A port with the Port Fast feature enabled is moved directly to the spanning-tree
forwarding state.
Example
The following example shows how to enable the Port Fast feature on fixed port 2.
Switch(config-if)# spanning-tree portfast fa5/2
You can verify the previous command by entering the show running-config in
privilege EXEC mode.
switchport access
Use the switchport access interface configuration command to configure a port
as a static-access port. The port operates as a member of the configured VLAN.
Use the no form of this command to reset the access mode to the default VLAN
for the switch.