Specifications

7-9
Catalyst 4224 Access Gateway Switch Software Configuration Guide
OL-2031-02
Chapter 7 Configuring the Eight-Port FXS RJ-21 Module
Sample Configuration
In the sample configuration illustrated in Figure 7-1, Fax1 is connected through
an FXS port to the Cisco 2610 router. The router is connected through
Fast Ethernet to the eight-port FXS module, which is connected through an FXS
port to Fax2.
This section includes the following configuration-related samples:
• Cisco 2600 Sample Configuration, page 7-10
• FXS Module Sample Configuration, page 7-10
• Displaying Cisco 2600 Configuration Values, page 7-11
• Displaying FXS Module Configuration Values, page 7-12
Figure 7-1 Configuration for Connecting Faxs through Catalyst 4224
The following template can be used to implement this configuration:
V
Fax 1 Fax 2
FXS port
1/1/0
FXS port
4/0
Cisco 2601 Catalyst 4224
58987
Dial-Peer Tag
1
1. Assigns a unique number (1, 2,...) to a dial peer. Has only local significance.
Destination
Pattern
2
2. Assigns phone numbers to dial peers. The router directs voice calls based on these patterns.
Type Voice Port
Session
Target
3
codec
For Cisco 2610
1 10 POTS 1/1/0 — G.711
(default)
220VoIP— 172.20.59.93 G.729
(default)
For Eight-Port RJ-21 FXS Module
120POTS4/0— G.711
(default)
210VoIP— 172.20.59.61 G.729
(default)