Specifications

Chapter 6 Configuring VoIP
Configure Dial Peers
6-18
Catalyst 4224 Access Gateway Switch Software Configuration Guide
OL-2031-02
Figure 6-5 Outgoing Calls, from the Perspective of POTS Dial Peer 1
To configure call connectivity between the source and the destination as
illustrated in Figure 6-5, enter the following commands on Catalyst 4224
10.1.2.2:
c4224(config)# dial-peer voice 1 pots
c4224(config-dial-peer)# destination-pattern 14085554000
c4224(config-dial-peer)# port 0/0
c4224(config)# dial-peer voice 2 voip
c4224(config-dial-peer)# destination-pattern 13105551000
c4224(config-dial-peer)# session target ipv4:10.1.1.2
Figure 6-6 shows how to complete the end-to-end call between dial peer 1 and dial
peer 4.
Figure 6-6 Outgoing Calls, from the Perspective of POTS Dial Peer 2
58510
[phone]
[phone]
10.1.2.2
Source Destination
10.1.1.2
Voice port
0/0
Voice port
0/0
Catalyst 4224
Catalyst 4224
VoIP call leg
dial peer 2
POTS call leg
dial peer 1
IP cloud
V
V
58511
(408)
555-4000
Catalyst 4224
Catalyst 4224
VoIP call leg
dial peer 3
POTS call leg
dial peer 4
(310)
555-1000
10.1.2.2
SourceDestination
10.1.1.2
Voice port
0/0
Voice port
0/0
IP cloud
V V