Specifications

5-25
Catalyst 4224 Access Gateway Switch Software Configuration Guide
OL-2031-02
Chapter 5 Configuring the Voice Interfaces
ISDN BRI Configuration (H.323)
Step 2 Assign the switch type to the interface by entering the following commands. The
following example assigns the switch type basic-5ess:
c4224(config)# interface bri 0/0
c4224(config-if)# isdn switch-type basic-5ess
For details about configuring Cisco CallManager, refer to the Cisco CallManager
Administration Guide.
Note After completing these steps, configure the route pattern and dial plan and
save your configuration, as described in “H.323 Gateway Configuration”
section on page 5-16.
Ta b l e 5 - 3 ISDN Switch Types
Region ISDN Switch Type Description
Australia basic-ts013 Australian TS013 switches
Europe basic-1tr6 German 1TR6 ISDN switches
basic-nwnet3 Norwegian NET3 ISDN switches
(phase 1)
basic-net3 NET3 ISDN switches (UK and others)
vn2 French VN2 ISDN switches
vn3 French VN3 ISDN switches
Japan ntt Japanese NTT ISDN switches
New Zealand basic-nznet3 New Zealand NET3 switches
North America basic-5ess AT&T basic rate switches
basic-dms100 NT DMS-100 basic rate switches
basic-nil1 National ISDN-1 switches