Specifications

5-15
Catalyst 4224 Access Gateway Switch Software Configuration Guide
OL-2031-02
Chapter 5 Configuring the Voice Interfaces
MGCP Configuration
This command displays information about the status of the PRI backhaul link and
the status of any PRI D channels in the gateway. The following example shows the
type of information the system displays.
Example 5-4 PRI Backhaul Status
PRI Backhaul link info:
Link Protocol: TCP
Remote Port Number: 2428
Remote IP Address: 172.20.71.44
Current Link State: OPEN
Statistics:
Packets recvd: 0
Recv failures: 0
Packets xmitted: 0
Xmit failures: 0
PRI Ports being backhauled:
Slot 1, port 1
Slot 1, port 0
Sample Configuration
The following example shows the overall configuration required to enable MGCP
on a E1/PRI line:
isdn switch-type primary-5ess
controller E1 1/0
framing esf
linecode b8zs
pri-group timeslots 1-31 service mgcp
interface Serial 1/0:15
no ip address
no logging event link-status
isdn switch-type primary-5ess
isdn incoming-voice voice
no cdp enable
isdn bind-l3 ccm-manager backhaul q931
dial-peer voice 1 pots
application mgcpapp
port 1/0:0