Specifications

Chapter 5 Configuring the Voice Interfaces
MGCP Configuration
5-6
Catalyst 4224 Access Gateway Switch Software Configuration Guide
OL-2031-02
You can also manually redirect a Cisco voice gateway to the backup
Cisco CallManager server by entering the following command:
Gateway(config)#ccm-manager switchover-to-backup
Table 5-1 Switchback Command Options
Switchback Command Option Function
graceful The default value. Completes all
outstanding calls before returning the
gateway to the control of the primary
Cisco CallManager server.
immediate Returns the gateway to the control of
the primary Cisco CallManager server
without delay, as soon as the network
connection to the server is
reestablished.
schedule-time hh:mm Returns the gateway to the control of
the primary Cisco CallManager server
at the specified time, where hh:mm is
the time according to a 24-hour clock.
If the configured schedule time is
earlier than the time at which the
gateway reestablishes a network
connection to the primary server, the
switchback will occur at the specified
time on the following day.
uptime-delay minutes Returns the gateway to the control of
the primary Cisco CallManager server.
This occurs when the primary server
runs for a specified number of minutes
after a network connection is
reestablished to the primary server.
Permitted values range from 1 to 1440
(1 minute to 24 hours).