Specifications
Data Sheet
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 15 of 16
Ordering Information
Table 7 gives ordering information for Cisco Catalyst 2960 LAN Base Switches.
Table 7. Ordering Information for Cisco Catalyst 2960 LAN Base Switches
Part Numbers Description
WS-C2960-8TC-L
●
8 Ethernet 10/100 ports and 1 dual-purpose uplink (dual-purpose uplink port has one
10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active)
●
Compact size with no fan; magnet included
●
LAN Base Image installed
WS-C2960-24TT-L
●
24 Ethernet 10/100 ports and two 10/100/1000TX uplinks
●
1 RU fixed-configuration
●
LAN Base Image installed
WS-C2960-48TT-L
●
48 Ethernet 10/100 ports and two 10/100/1000TX uplinks
●
1 RU fixed-configuration
●
LAN Base Image installed
WS-C2960-24TC-L
●
24 Ethernet 10/100 ports and 2 dual-purpose uplinks (each dual-purpose uplink port has one
10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active)
●
1 RU fixed-configuration
●
LAN Base Image installed
WS-C2960-48TC-L
●
48 Ethernet 10/100 ports and 2 dual-purpose uplinks (each dual-purpose uplink port has one
10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active)
●
1 RU fixed-configuration
●
LAN Base Image installed
WS-C2960G-8TC-L
●
7 Ethernet 10/100/1000 ports and 1 dual-purpose uplink (dual-purpose uplink port has one
10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active)
●
Compact size with no fan; magnet included
●
LAN Base Image installed
WS-C2960G-24TC-L
●
20 Ethernet 10/100/1000 ports and 4 dual-purpose uplinks (each dual-purpose uplink port has
one 10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active)
●
1 RU fixed-configuration
●
LAN Base Image installed
WS-C2960G-48TC-L
●
44 Ethernet 10/100/1000 ports and 4 dual-purpose uplinks (each dual-purpose uplink port has
one 10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active)
●
1 RU fixed-configuration
●
LAN Base Image installed
PWR-RPS2300 Cisco Redundant Power System 2300 and Blower,No Power Supply
BLNK-RPS2300= Spare Bay Insert for Cisco Redundant Power System 2300
CAB-RPS2300= Spare RPS2300 Cable for Devices other than E-Series Switches
BLWR-RPS2300= Spare 45CFM Blower for Cisco Redundant Power System 2300
C3K-PWR-750WAC= Catalyst 3750-E/3560-E/RPS 2300 750WAC power supply spare
CBLGRD-C2960-8TC= Cable guard for the Cisco Catalyst 2960-8TC compact switch
CBLGRD-C2960G-8TC= Cable guard for the Cisco Catalyst 2960G-8TC compact switch
RCKMNT-19-CMPCT= Rack-mount for the Cisco Catalyst 2960-8TC and Catalyst 2960G-8TC compact switches
RCKMNT-1RU= Spare rack-mount kit for the Cisco Catalyst 2960 Series
RCKMNT-REC-1RU= 1 RU recessed rack-mount kit for the Cisco Catalyst 2960 Series
GLC-LH-SM= 1000BASE-LX/LH SFP transceiver module for MMF and SMF, 1300-nm wavelength
GLC-SX-MM= 1000BASE-SX SFP transceiver module for MMF, 850-nm wavelength
GLC-ZX-SM= 1000BASE-ZX SFP transceiver module for SMF, 1550-nm wavelength
GLC-T= 1000BASE-T SFP transceiver module for Category 5 copper wire
Not supported on the Cisco Catalyst 2960-8TC and Catalyst 2960G-8TC
compact switches