Installation guide

1-4
Catalyst 2960 Switch Hardware Installation Guide
OL-7075-09
Chapter 1 Product Overview
Front Panel Description
Some Catalyst 2960 switches have a redundant power system (RPS) connector for an optional
Cisco RPS 2300 or Cisco RPS 675 redundant power system that operates on AC input and supplies
backup DC power to the switch. See the compatibility matrix documents for the RPS systems on
Cisco.com for more information about switch support for the RPS models.
These switches do not have an RPS connector:
• Catalyst 2960-8TC-L
• Catalyst 2960G-8TC-L
• Catalyst 2960-8TC-S
• Catalyst 2960PD-8TT-L
• Catalyst 2960-24-S
• Catalyst 2960-24TC-S
• Catalyst 2960-Plus 24TC-S
• Catalyst 2960-48TT-S
• Catalyst 2960-48TC-S
• Catalyst 2960-Plus 48TC-S
Front Panel Description
These sections describe the switch front panels:
• Catalyst 2960 Switch 24- and 48-Port Switches, page 1-4
• Catalyst 2960 8-Port Switches, page 1-9
• 10/100 Ports, page 1-11
• 10/100/1000 Ports, page 1-11
• PoE Ports (Only Catalyst 2960 PoE Switches), page 1-12
• SFP Module Slots, page 1-13
• Dual-Purpose Port, page 1-13
• Power Input Port (Catalyst 2960PD-8TT-L Switch), page 1-14
• LEDs, page 1-14
• Cable Guard for the Catalyst 2960 8-Port Switches, page 1-19
Catalyst 2960 Switch 24- and 48-Port Switches
These sections describe the Catalyst 2960 24- and 48-port switches:
• Catalyst 2960-24-S, 2960-Plus 24TC-S, 2960-24TC-S, 2960-Plus 48TC-S, 2960-48TC-S, and
2960-48TT-S Switches, page 1-5
• Catalyst 2960-Plus 24PC-L, 2960-24PC-L, 2960-Plus 24PC-S, 2960-24PC-S, 2960-Plus 24LC-L,
2960-Plus 24LC-S, 2960-24LC-S, 2960-Plus 24TC-L, 2960-24TC-L, 2960-Plus 48TC-L,
2960-48TC-L, 2960-24LT-L, 2960-24TT-L, 2960-48TT-L, 2960-Plus 48PST-L, 2960-48PST-L,
2960-Plus 48PST-S, and 2960-48PST-S Switches, page 1-6
• Catalyst 2960G-24TC-L and Catalyst 2960G-48TC-L Switches, page 1-9