Technical information

32
Cisco Unified CallManager 4.2(3) Call Detail Record Definition
OL-10659-01
Working with CDRs
numberPacketsSent Integer Designates the total number of Routing
Table Protocol (RTP) data packets that the
device transmitted since starting
transmission on this connection. The value
remains zero if the connection was set in
“receive only” mode.
Default - 0.
numberOctetsSent Integer Specifies the total number of payload
octets (that is, not including header or
padding) that the device transmitted in RTP
data packets since starting transmission on
this connection. The value remains zero if
the connection was set in “receive only”
mode.
Default - 0.
numberPacketsReceived Integer Specifies the total number of RTP data
packets that the device received since
starting reception on this connection. The
count includes packets that were received
from different sources if this is a multicast
call. The value remains zero if the
connection was set in “send only” mode.
Default - 0.
numberOctetsReceived Integer Specifies the total number of payload
octets (that is, not including header or
padding) that the device received in RTP
data packets since starting reception on this
connection. The count includes packets
that were received from different sources if
this is a multicast call. The value remains
zero if the connection was set in “send
only” mode.
Default - 0.
Field Name
Range of
Values Description