Technical information

23
Cisco Unified CallManager 4.2(3) Call Detail Record Definition
OL-10659-01
Working with CDRs
destMediaTransportAddress_IP Integer Identifies the IP address of the device that
terminated the media for the call.
For Cisco Unified IP Phones, this field
designates the address of the Cisco
Unified IP Phone.
For PSTN calls, this field designates the
address of the H.323 gateway.
For intercluster calls, this field shows the
address of the remote Cisco Unified IP
Phone.
The “IP Addresses” section describes the
IP address format.
Default - 0. If the destination cannot be
reached, this field will be 0.
destMediaTransportAddress_Port Positive Integer Identifies the IP port number that is
associated with the
DestMediaTransportAddress_IP field.
Default - 0. If the destination cannot be
reached, this field will be 0.
destMediaCap_payloadCapability 0 to 15, 32 to
33, 80 to 84
Identifies the codec type that the
terminating party used to transmit media.
The Codec Types section lists the valid
values.
Default - 0. If the destination cannot be
reached, this field will be 0.
destMediaCap_maxFramesPerPacket Positive Integer Identifies the number of milliseconds of
data per packet that the terminating party
of the call sent. This field, normally set to
10, 20, or 30 for G.729 or G.711 codecs,
can store any nonzero value.
This field can be zero if the media is never
established.
Default - 0. If the destination cannot be
reached, this field will be 0.
destMediaCap_g723BitRate 0 Depreciated since Cisco CallManager
Release 3.3(4).
Default - This field is always 0.
destVideoCap_Codec 100 = H.261
101 = H.263
102 = Cisco
Video Link
Identifies the codec type that the
terminating party used to transmit video
(H.261, H.263, and the Cisco Video Link).
Default - 0. If the destination cannot be
reached, this field will be 0.
Field Name
Range of
Values Description