Technical information

20
Cisco Unified CallManager 4.2(3) Call Detail Record Definition
OL-10659-01
Working with CDRs
destLegIdentifier Positive Integer Identifies the terminating leg of a call.
This field specifies unique values within a
cluster. If the leg of a call persists across
several sub-calls and, consequently,
several CDRs (as during a call transfer),
this value remains constant.
Default - 0. If the destination cannot be
reached, this field will be 0.
destNodeId Positive Integer Identifies the node within a cluster to
which the terminating party of the call is
registered at the time that the call is made.
Default - 0. If the destination cannot be
reached, this field will be 0.
destSpan Positive Integer
or Zero
For calls received at a gateway, this field
indicates the B channel number of the T1
or PRI trunk where the call is received.
For H.323 gateways, in which the span
number is unknown, this field contains the
call leg ID of the destination.
For calls not terminating at a gateway, the
value is zero.
Default - 0. If the destination cannot be
reached, this field is 0.
destIpAddr Integer Identifies the IP address of the device that
terminated the call signaling.
For Cisco Unified IP Phones, this field
specifies the address of the Cisco Unified
IP Phone.
For PSTN calls, this field specifies the
address of the gateway.
For intercluster calls, this field specifies
the address of the remote Cisco Unified
CallManager.
The “IP Addresses” section describes the
IP address format.
Default - 0. If the destination cannot be
reached, this field will be 0.
destIpPort Positive Integer
or Zero
Identifies the IP port number that is
associated with the destIpAddr field.
This field is not used or populated by
Cisco Unified CallManager.
Default - Field will always be 0 or null.
Field Name
Range of
Values Description