Technical information

19
Cisco Unified CallManager 4.2(3) Call Detail Record Definition
OL-10659-01
Working with CDRs
origMediaCap_maxFramesPerPacket Positive Integer
or Zero
Identifies the number of milliseconds of
data per packet that the originating party
sent. This field, normally set to 10, 20, or
30 for G.729 or G.711 codecs, can store
any nonzero value.
Default - 0. If media is not established, this
field will be 0.
origMediaCap_g723BitRate 0, 1, or 2 When the codec that the originating party
used is G.723, indicates the data rate that
was used. The following values apply:
• 1—5.3K
• 2—6.3K
When the codec is not G.723, this value
equals zero.
Default - Field will always be 0.
origVideoCap_Codec 100 = H.261
101 = H.263
102 = Cisco
Video Link
Identifies the codec type used by the
originator to transmit video (H.261,
H.263, and the Cisco Video Link.)
Default - 0. If media is not established, this
field will be 0.
origVideoCap_Bandwidth Positive Integer Identifies the bandwidth measured in units
of kbps.
Default - 0. If media is not established, this
field will be 0.
origVideoCap_Resolution 1 = SQCIF
2 = QCIF
3 = CIF
4 = CIF4
5 = CIF16
Identifies the Video resolution.
Default - 0. If media is not established, this
field will be 0.
origVideoTransportAddress_IP Integer Identifies the IP address of the device that
originates the call.
Default - 0. If media is not established, this
field will be 0.
origVideoTransportAddress_Port Positive Integer Identifies the video RTP port associated
with the origVideoTransportAddress_IP
field.
Default - 0. If media is not established, this
field will be 0.
Field Name
Range of
Values Description