Technical information

16
Cisco Unified CallManager 4.2(3) Call Detail Record Definition
OL-10659-01
Working with CDRs
origCause_value 0 to 128 For calls that the originating party cleared,
reflects the reason for the clearance. The
“Cause Codes” section lists the valid
values per Q.850.
For calls cleared by the terminating party,
this field is zero.
In addition to the standard values that are
described in Q.850, when a call is split by
a feature (transfer/conference), the CDR
terminates, and this field gets set to 126.
This represents a proprietary value for this
field.
MLPP uses the current cause codes:
• 8—”Preemption: Call is being
preempted, circuit not reserved for
reuse.”
• 9—”Preemption: Call is being
preempted, circuit reserved for
reuse.”
• 46—”Precedence call blocked: No
preemptable circuit or called user is
busy with a call of equal or higher
precedence level.”
• 50—”Requested facility not
subscribed.” Cisco Unified
CallManager never generates this
cause value. If it is received from
another network, the system “transits”
this value, if applicable.
Default - 0.
origPrecedenceLevel 0 to 4 For MLPP, each call leg has a precedence
level. This field represents the original
legs precedence level.
• Precedence 0 = FLASH OVERRIDE
• Precedence 1 = FLASH
• Precedence 2 = IMMEDIATE
• Precedence 3 = PRIORITY
• Precedence 4 = ROUTINE
Default - 4.
Field Name
Range of
Values Description