Technical information

14
Cisco Unified CallManager 4.2(3) Call Detail Record Definition
OL-10659-01
Working with CDRs
origLegCallIdentifier Positive Integer Identifies the originating leg of a call with
a value that is unique within a cluster. If
the leg of a call persists across several
sub-calls, and consequently several CDRs
(as during a call transfer), this value
remains constant.
Default - This field should always be
populated.
dateTimeOrigination Integer Identifies the date and time when the user
goes off hook or the date and time when
the setup message is received for an
incoming call. UTC specifies the time.
Default - This field should always be
populated.
origNodeId Positive Integer Identifies the node within a cluster to
which the originator of the call is
registered at the time the call is made.
Default - This field should always be
populated.
origSpan Positive Integer
or Zero
For calls originating at a gateway, this
field indicates the B channel number of the
T1 or PRI trunk where the call is
originated.
For H.323 gateways, in which the span
number is unknown, this field contains the
call leg ID of the originator.
For calls that did not originate at a
gateway, the value is zero.
Default - Populated based on these rules.
origIpAddr Integer Identifies the IP address of the device that
originated the call signaling.
For Cisco Unified IP Phones, this field
specifies the address of the Cisco Unified
IP Phone.
For PSTN calls, this field specifies the
address of the gateway.
For intercluster calls, this field specifies
the address of the remote Cisco Unified
CallManager.
The “IP Addresses” section describes the
IP address format.
Default - Populated based on these rules.
Field Name
Range of
Values Description