Datasheet

-28 Cisco IGX 8400 Series Installation and Configuration, Release 9.3.0
Standard IGX Cables
Table C-43 lists the cables you can order directly from Cisco Systems. The length of the cable
appears as a suffix to the model number. For example 5610-50 indicates a 50-foot cable. Cables are
generally available in standard lengths of 10 ft (3 m.), 25 ft (7.6 m.), 50 ft (15 m.), 75 ft (22.8 m.)
and 100 ft (30 m.) Lengths of 101 ft. (30 m.) to 600 ft. (183 m.) are available on a special order.
Where applicable, Table C-43 indicates the connector gender (male-female) as well as the number
of pins. For example T1/M15-M15 indicates a cable terminated with a male DB-15 at both ends.
Note Most cables listed as T1 can also be used for E1 service.
Note Transmit direction is towards the “Y” trunk.
Table C-43 Standard IGX Cables Available From Cisco
Model Description Usage
5608 T1, pigtail to RJ48 CSU to telco demarc
5614 T1/M15-M15 turnover E1 trunk to CSU
5616 T1/M15-M15
5680 BNC-DB-15 E1 trunk
5685 T1/M15-M15 turnover, Y-cable E1 trunk redundancy
5630 V.35/M34-F34 Subrate trunk or data circuit
5636E V.35 Y-cable Subrate trunk or data circuit redundancy
5645 EIA/TIA-422/X.21 adapter-DTE IGX is DTE
5646 EIA/TIA-422/X.21 adapter-DCE IGX is DCE
5644 EIA/TIA-422 Y-cable Subrate trunk or data circuit redundancy
5695 X.21/DB-15 Y-cable Subrate trunk or data circuit redundancy
5620 EIA/TIA-232/M25-F25 Control port to control terminal, StrataView
Plus, or external window device
5621 EIA/TIA-232/M25-M25 special Control or Aux. port to modem
5625 V.35/M15-F25 LDI8 (DCE) to data device
5626E V.35/M15-M25 LDI8 (DTE) to data device
5629 EIA/TIA 232/M15-M15, Y-cable LDI redundancy