Datasheet

-20 Cisco IGX 8400 Series Installation and Configuration, Release 9.3.0
HDM V.35 Port Pin Assignments
Table C-31 contains a listing of IGX V.35 Port pin assignments for the SDI card. A standard V.35
cable works this application.
Table C-31 HDM V.35 Port Pin Assignments
Pin No. Name Source Description
A Gnd. both Protective (Shield) ground
B Sig. Gnd. both Signal ground
C RTS DTE Request to Send
D CTS DCE Clear to Send
E DSR DCE Data Set Ready
F DCD DCE Data Carrier Detect (RLSD)
H DTR DTE Data Terminal Ready
J RI DCE Ring Indicator
K TM DCE Test Mode
P/S TxD DTE Transmit Data from DTE
R/T RxD DCE Receive Data to DTE
U/W XTC DTE External Transmitter Clock
V/X RxC DCE Receiver Clock
Y/a TxC DCE Transmitter Clock