Datasheet
Page 12 of 2878-19803-02 Cisco TelePresence System T3 System Assembly Guide, December 2011
Cameras and codecs
Doasfollows:
1. Open the top cover.
2. Locate the camera cable.
3. Hold the camera upside down.
4. Connect the HDMI and RJ45 connectors of the camera
cable.
RJ45
HDMI
Mounting hole (Tripod) 1/4" UNC
116606 rev.06
RevS/N
www.tandberg.com/recycling
( )
Made in Norway
( )
PrecisionHD 1080p
TTC8-02
2
0
0
0
0
0
0
0
0
1
1
1
Video format
3
0
0
0
0
1
1
1
1
0
0
0
4
0
0
1
1
0
0
1
1
0
0
1
1
0
0
0
0
0
0
0
0
0
0
0
5
HD-SDI
0 Auto*
1 1080p25
0 1080p30
1 1080p50
0 1080p60
1 720p25
0 720p30
1 720p50
0 720p60
1 480p60
0
SW control**
1080p25
1080p30
720p50
720p60
720p25
720p30
720p50
720p60
480p60
1
0
HDMI
*Camera negotiates format over HDMI, HD-SDI tracks
HDMI, and defaults to 1080p30 in absence of HDMI sync.
**Please consult manual.
5. Carefully put the camera in place, then push the cable
down the channel while doing this.
6. Locate the other end of the
camera cable mounted to
the monitor. Remove the
cable clamps designed to
fasten the cable inside the
bottom module.
7. Put cable clamps back in once all cabling has been
completed.
8. Repeat for the other two cameras.
9. Detach two screws on each side of the codec, as shown.
10. Mount the bracket onto the codec and screw the screws
back in. The bracket can be found in the Telepresence kit.
11. Use four M6 (Bag 4) nuts to attach the codec and the
bracket to the inside of the bottom module lid.
12.Repeat for the other two codecs.
13.Connect the camera cables to the codecs as shown.
Line in
Rev.
Date Prep.
Checked
Change
-
-
-
Telecom AS
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Part weight:
Sheet size:
Scale:
Surface treatment
Specication:
Material
Tolerances
Unit:
European
projection
Sheet 1 of 1
All materials, nishes, and proccesses
must comply with the RoHS directives
Dimensions without paint or nish
Flame class requirement: -
Processes
Type:
Manufacturer:
Type number:
Thickness:
Color:
Surface:
Glossiness:
Flame class:
UL reference:
3D CAD model le 116805
rev. 00Z+ is master
Saturn C70 Unit
116805 rev.
3172g
A3
mm
1:5
Line in
Rev.
Date Prep.
Checked
Change
-
-
-
Telecom AS
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Part weight:
Sheet size:
Scale:
Surface treatment
Specication:
Material
Tolerances
Unit:
European
projection
Sheet 1 of 1
All materials, nishes, and proccesses
must comply with the RoHS directives
Dimensions without paint or nish
Flame class requirement: -
Processes
Type:
Manufacturer:
Type number:
Thickness:
Color:
Surface:
Glossiness:
Flame class:
UL reference:
3D CAD model le 116805
rev. 00Z+ is master
Saturn C70 Unit
116805 rev.
3172g
A3
mm
1:5
Rev.
Date
Prep.
Checked
Change
-
-
-
Telecom AS
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Part weight:
Sheet size:
Scale:
Surface treatment
Specication:
Material
Tolerances
Unit:
European
projection
Sheet 1 of 1
All materials, nishes, and proccesses
must comply with the RoHS directives
Dimensions without paint or nish
Flame class requirement: -
Processes
Type:
Manufacturer:
Type number:
Thickness:
Color:
Surface:
Glossiness:
Flame class:
UL reference:
3D CAD model le 116805
rev. 00Z+ is master
Saturn C70 Unit
116805 rev.
3172g
A3
mm
1:5
Line in
Rev.
Date Prep.
Checked
Change
-
-
-
Telecom AS
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Part weight:
Sheet size:
Scale:
Surface treatment
Specication:
Material
Tolerances
Unit:
European
projection
Sheet 1 of 1
All materials, nishes, and proccesses
must comply with the RoHS directives
Dimensions without paint or nish
Flame class requirement: -
Processes
Type:
Manufacturer:
Type number:
Thickness:
Color:
Surface:
Glossiness:
Flame class:
UL reference:
3D CAD model le 116805
rev. 00Z+ is master
Saturn C70 Unit
116805 rev.
3172g
A3
mm
1:5
Rev.
Date
Prep.
Checked
Change
-
-
-
Telecom AS
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Part weight:
Sheet size:
Scale:
Surface treatment
Specication:
Material
Tolerances
Unit:
European
projection
Sheet 1 of 1
All materials, nishes, and proccesses
must comply with the RoHS directives
Dimensions without paint or nish
Flame class requirement: -
Processes
Type:
Manufacturer:
Type number:
Thickness:
Color:
Surface:
Glossiness:
Flame class:
UL reference:
3D CAD model le 116805
rev. 00Z+ is master
Saturn C70 Unit
116805 rev.
3172g
A3
mm
1:5
14. Shut the top cover and attach the cover and the loudspeaker
grill as shown. Make sure all snaps and magnet points are
securely fixed. Repeat for the two other cameras.
Flickering image? Some countries use a line frequency of 50Hz, while
others use 60Hz. Default camera setting is for 50Hz, which will cause
the image to flicker in 60Hz regions. To rectify this, set the DIP switches
to 1080p60 when used in countries with 60Hz line frequency—see the
table on the camera’s underside.
Splitter bracket
Fasten the splitter bracket in the right bottom module using
2 × M6 flange nuts. Then place the HDMI splitter onto the
bracket—connectors pointing downwards with the power
switch to the left. Use two M6 nuts to fasten the power
supply bracket and insert the power supply in the bracket
just below the splitter, as shown.
Splitterpowersupply
Splitter
Bracket for
Splitter
power supply
Splitterbracket
Push the camera cable down the
channel through the Monitor.
Use the cable clamps to fasten the cable
inside the Bottom Module
and connect to the codec.
Camera cable
Camera cable
goes inside the
channel