Datasheet

1-9
PA-MC-T3 Port Adapter Installation and Configuration
OL-2695-05
Chapter 1 Overview
Port Adapter Slot Locations on the Supported Platforms
Catalyst 6000 Family FlexWAN Module Slot Numbering
The Catalyst 6000 family FlexWAN module can be installed in any slot in a Catalyst 6000 family switch
except slot 1, which is reserved for the supervisor engine. A port adapter can be installed into either port
adapter bay 0 or bay 1 on a FlexWAN module. Figure 1-8 shows a Catalyst 6000 family switch with two
blank port adapters installed in a FlexWAN module.
Note Slot 1 is reserved for the supervisor engine. If a redundant supervisor engine is used, it would go in
slot 2; otherwise, slot 2 can be used for other modules.
Figure 1-8 Catalyst 6000 Family Switch with Port Adapters Installed on FlexWAN Module