Datasheet

© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 7 of 14
Storage relative humidity 10% to 95% noncondensing
Acoustic Noise
Measured per ISO 7779 and declared per ISO 9296.
Bystander positions operating mode at 25°C ambient.
Sound Pressure Sound Power
Model LpA (Typical) LpAD
(Maximum)
LwA (Typical) LwAD (Maximum)
Cisco Catalyst 2960S-48FPD-L
Cisco Catalyst 2960S-48LPD-L
Cisco Catalyst 2960S-24PD-L
42 dB 45 dB 5.2 B 5.5 B
Cisco Catalyst 2960S-48TD-L
Cisco Catalyst 2960S-24TD-L
44 dB 47 dB 5.4 B 5.7 B
Cisco Catalyst 2960S-48FPS-L
Cisco Catalyst 2960S-48LPS-L
Cisco Catalyst 2960S-24PS-L
42 dB 45 dB 5.2 B 5.5 B
Cisco Catalyst 2960S-48TS-L
Cisco Catalyst 2960S-24TS-L
44 dB 47 dB 5.4 B 5.7 B
Cisco Catalyst 2960S-48TS-S
Cisco Catalyst 2960S-24TS-S
44 dB 47 dB 5.4 B 5.7 B
Predicted Reliability
Model MTBF in hours
**
Cisco Catalyst 2960S-48FPD-L 183,498
Cisco Catalyst 2960S-48LPD-L 198,300
Cisco Catalyst 2960S-24PD-L 237,016
Cisco Catalyst 2960S-48TD-L 311,291
Cisco Catalyst 2960S-24TD-L 332,958
Cisco Catalyst 2960S-48FPS-L 189,242
Cisco Catalyst 2960S-48LPS-L 205,052
Cisco Catalyst 2960S-24PS-L 245,604
Cisco Catalyst 2960S-48TS-L 328,058
Cisco Catalyst 2960S-24TS-L 349,824
Cisco Catalyst 2960S-48TS-S 357,740
Cisco Catalyst 2960S-24TS-S 335,014
Cisco Catalyst 2960S-STACK 25,743,890
*
Not more than the following in a 1-year period: 96 consecutive hours, or 360 hours total, or 15 occurrences.
**
Based on Telcordia SR-332 Issue 2 methodology
Table 7. Connectors and Interfaces
Ethernet Interfaces
●
10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling
●
100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling
●
1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
●
1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
SFP and SFP+ Interfaces
For information about supported SFP/SFP+ modules, refer to the Transceiver Compatibility matrix tables at