Troubleshooting guide

Index
IN-15
ATM and Layer 3 Switch Router Troubleshooting Guide
OL-1969-01
show sdm size command 11-58, 11-59
show stacks command 2-2
show startup-config command 2-2
show tag-switching interfaces command 8-3
show tag-switching tdp discovery command 8-3
show tag-switching tdp neighbor command 8-8
show tag-switching tsp-tunnels command 8-10
show tech-support command F-1
show version command 2-2, 6-44
signaling, debugging 6-21
soft PVCs
ATM addresses
6-10 to 6-12
configuring two-sided connections 6-12 to 6-15
connection management 6-12
interface status 6-9 to 6-10
network, example (figure) 6-9
VCIs 6-10 to 6-12
VPIs 6-10 to 6-12
software
checking the version
3-8
version troubleshooting 3-7
software image
finding on Cisco.com
3-8, 3-11
SONET
alarms
E-4
sparse mode 11-44
SPD
description
11-54
troubleshooting 11-55
SRP 11-9
SSCOP
checking status
6-20
status command 6-22
summary addresses. See PNNI summary addresses
support, technical. See technical support
SVCC-RCC
caution
6-46
SVCC-RCCs
aggregated horizontal links
6-43
checking status 6-44 to 6-45
debugging 6-46 to 6-47
hello states 6-45
induced uplinks 6-43
overview 6-42
SVCs
alternate diagnostics
6-22 to 6-24
checking downstream 6-27
debugging routing 6-24 to 6-25
debugging signaling 6-21
ILMI status 6-20
SSCOP status 6-20
status at UNI interface 6-17 to 6-18
troubleshooting 6-16 to 6-29
UNI interfaces 6-18 to 6-21
switch card failures 10-1
switch controller 8-13
switched virtual channel connection routing control
channels. See SVCC-RCC
switched virtual channels. See SVCs
switching database manager. See SDM
switch route processor. See SRP
switch router
architecture (figure)
11-9
functions of 11-2
syslog servers
logging troubleshooting information
A-9, F-2
setting up A-9
system diagnostics
enabling all
A-4
system redundancy
configuring
3-13 to 3-18
T
T1 port adapters
cabling
5-35
CRC errors 5-34
displaying configurations 5-32