Troubleshooting guide

13-37
ATM and Layer 3 Switch Router Troubleshooting Guide
OL-1969-01
Chapter 13 Troubleshooting ATM Router Module Connections
Troubleshooting Frame Relay PVC, Terminating on ATM Router Module
Data in Interval 1:
8222 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 5 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs
217 Unavail Secs
.
[Information Deleted]
.
Step 13 Enter the show atm traffic command to display the ATM router module and pseudo-ATM interface
traffic.
Switch# show atm traffic
Interface ATM0/0/0
Rx cells: 0
Tx cells: 0
5 minute input rate: 0 bits/sec, 0 cells/sec
5 minute output rate: 0 bits/sec, 0 cells/sec
.
[Information Deleted]
.
Interface ATM-P1/0/0
Rx cells: 0
Tx cells: 0
5 minute input rate: 0 bits/sec, 0 cells/sec
5 minute output rate: 0 bits/sec, 0 cells/sec
.
[Information Deleted]
.
Interface ATM4/0/0
Rx cells: 0
Tx cells: 0
5 minute input rate: 0 bits/sec, 0 cells/sec
5 minute output rate: 0 bits/sec, 0 cells/sec
Switch#
Step 14 Verify that the Rx and Tx counters are incrementing. Check the display numerous times to verify the
interface is receiving and sending cells.