Troubleshooting guide

10-44
ATM and Layer 3 Switch Router Troubleshooting Guide
OL-1969-01
Chapter 10 Troubleshooting Ethernet, ATM Uplink, and POS Uplink Interfaces
Troubleshooting Packet-over-SONET Uplink with Enhanced Gigabit Ethernet Interface Modules
SMDR 0xFF78 SSTR 0x1202 SSMR 0x4002 EVER 0x3001
SIMR 0x0000 MBXW 0x0000 MBXR 0x0000 SPER 0xF000
Xpif Counters:
MAC Receive Counters:
Bytes =0
pkt64 =0
pkt65to127 =0
pkt128to255 =0
pkt256to511 =0
pkt512to1023 =0
pkt1024to1518 =0
pkt1519to1530 =0
good_giants =0
error_giants =0
good_runts =0
error_runts =0
ucast_pkts =0
mcast_pkts =0
bcast_pkts =0
sync_loss_errs =0
overruns =0
fcs_errs =0
delimiter_seq_errs =0
gmac_dropcounts =0
symbol_errs =0
MAC Transmit Counters:
Bytes =0
pkt64 =0
pkt65to127 =0
pkt128to255 =0
pkt256to511 =0
pkt512to1023 =0
pkt1024to1518 =0
pkt1519to1530 =0
good_giants =0
Slicer Receive Counters:
Cells =89486
Frames =23980
Header Sequence Errors=0
fcs_errs =0
Length =0
Slicer Transmit Counters:
Cells =0
Frames =0
Status Registers:
Rx_gmac_status =00000000
Tx_gmac_status =00000000
Rx_slicer_status =00000003
Tx_slicer_status =00000000
Switch#
Note The numbers under the Section and Line are accumulators and tell you the number of times the
condition has occurred, not if it is currently happening.