Troubleshooting guide

10-38
ATM and Layer 3 Switch Router Troubleshooting Guide
OL-1969-01
Chapter 10 Troubleshooting Ethernet, ATM Uplink, and POS Uplink Interfaces
Troubleshooting ATM Uplink with Enhanced Gigabit Ethernet Interface Modules
Step 7 Use the show controllers atm card/subcard/port command to check the interface memory status and
configuration.
Switch# show controllers atm 12/0/0
slot: 7/0 Controller-Type : XPIF ATM OC12 PM - 1 Port MM
F000 chan0 chan1 chan2 chan3 sstr 1202
0006 0006 0006 0006
task0 11 11 11 11
task1 5E0 5E0 5E0 5E0
task2 11 11 11 11
task3 5E0 5E0 5E0 5E0
SMDR 0xFF78 SSTR 0x1200 SSMR 0x4002 EVER 0x3001
SIMR 0x0000 MBXW 0x0000 MBXR 0x0000 SPER 0xF000
TX SAR (Production 1.0.7) is Operational;
RX SAR (Production 1.0.7) is Operational;
SAR Counters:
tx_paks 0, tx_abort_paks 0, tx_idle_cells 2975800744
rx_paks 0, rx_drop_paks 0, rx_discard_cells 0
Xpif Counters:
MAC Receive Counters:
Bytes =0
pkt64 =0
pkt65to127 =0
pkt128to255 =0
pkt256to511 =0
pkt512to1023 =0
pkt1024to1518 =0
pkt1519to1530 =0
good_giants =0
error_giants =0
good_runts =0
error_runts =0
ucast_pkts =0
mcast_pkts =0
bcast_pkts =0
sync_loss_errs =0
overruns =0
fcs_errs =0
delimiter_seq_errs =0
gmac_dropcounts =0
symbol_errs =0
MAC Transmit Counters:
Bytes =0
pkt64 =0
pkt65to127 =0
pkt128to255 =0
pkt256to511 =0
pkt512to1023 =0
pkt1024to1518 =0
pkt1519to1530 =0
good_giants =0
Slicer Receive Counters:
Cells =21037265
Frames =5386756
Header Sequence Errors=0
fcs_errs =0
Length =0