Troubleshooting guide

7-9
ATM and Layer 3 Switch Router Troubleshooting Guide
OL-1969-01
Chapter 7 Troubleshooting LAN Emulation Switching Environments
Debugging the LANE Connection
Debugging the LANE Connection
This section outlines the debug commands used to troubleshoot the LANE setup and signalling.
Use the following debug commands to check the LANE configuration and setup processes:
Note Other helpful debug commands include the debug atm ilmi command and all the variations of the
debug atm sig command.
Command Purpose
debug lane client {all | le-arp | packet | signalling |
state | topology}
Debugs all LANE client setup processes.
debug lane client signalling interface atm
card/subcard/port
Debugs LANE client signaling processes
for a specific ATM interface.
debug lane config {all | events | packets} Debugs all LANE setup processes.
debug lane finder Debugs all LANE LECS setup processes.
debug lane server interface atm card/subcard/port Debugs LANE server processes for a
specific ATM interface.
debug lane signalling interface atm card/subcard/port Debugs LANE signaling processes for a
specific ATM interface.
no debug all Turns off all debugging.