Troubleshooting guide

6-70
ATM and Layer 3 Switch Router Troubleshooting Guide
OL-1969-01
Chapter 6 Troubleshooting Switch Router ATM Network Connections
Using PNNI Trace Connection
To delete the PNNI trace connection output stored in system VRAM, use the following command:
Follow these steps to delete the PNNI trace connection output:
Step 1 Use the clear atm pnni trace connection all command to delete all active and accepted PNNI
connection traces.
Switch# clear atm pnni trace connection all
Step 2 Use the clear atm pnni trace connection command, with the index number, to delete a specific PNNI
connection trace.
Switch# clear atm pnni trace connection 100
Command Purpose
clear atm pnni trace connection {all |
index-number}
Deletes the PNNI connection-trace output
stored in VRAM.