Installation guide

3
Release Notes for Cisco IOS Release 12.0(10)W5(18c) Feature Packs for the Cisco Catalyst 8500 CSR
78-10598-02
System Requirements
Note If you cannot use RSL to load images, you can follow the instructions in the
“Alternatives to RSL” section on page 12.
• Cisco Connection Online wallet card and sticker with service contact information
• A sticker with your feature pack’s product number.
• Software license for using Cisco software in object code form on a single access server or router.
How to Use These Release Notes
The tables in these release notes contain details about the Cisco feature packs. Use these tables to
perform the following tasks before loading a software image onto a router:
1. Use Table 1, “Catalyst 8500 CSR Default Memory and Upgrade Options,” for the feature set
memory requirements, factory-default memory, and available memory upgrades for your
Catalyst 8510 MSR or LightStream 1010.
2. Use Table 4, “Feature Pack Product Numbers Quick Reference List,” to identify the software image
you want to load.
3. Use Table 5, “Catalyst 8500 CSR Feature Packs,” to identify your feature pack and the memory
required for your feature set, based on the image you load.
4. Use the tables in the “Feature Set Tables” section on page 6 to identify which features are supported
in a feature set image.
System Requirements
This section describes the following topics:
• Memory Defaults and Upgrade Options, page 3
• Hardware Supported, page 3
• Software Compatibility, page 5
• Determining Your Software Release, page 5
• Product Numbers Quick-Reference List, page 6
• Feature Pack Overview Table, page 6
Memory Defaults and Upgrade Options
Table 1 Catalyst 8500 CSR Default Memory and Upgrade Options
Memory Type
Catalyst 8540
CSR Defaults
Catalyst 8510
CSR Defaults Upgrade Options
Flash memory 16 MB 16 MB MEM-ASP-FLC16M=
MEM-ASP-FLC20M=
DRAM 256 MB 64 MB None