Installation guide

11
Release Notes for Cisco IOS Release 12.0(10)W5(18c) Feature Packs for the Cisco Catalyst 8500 CSR
78-10598-02
Installation Notes
Installation Notes
This section describes the following topics:
• Image Installation Tips and Troubleshooting When Using RSL, page 11
• Alternatives to RSL, page 12
POS: SONET alarms (LOS, LOF, AIS, and RDI detection/reporting)
POS: Threshold Crossing Alerts for B1, B2, B3 with configurable thresholds
Table 16 Additional Protocols Feature Set Supported by the Catalyst 8500 CSR
Additional Protocols Supported
BOOTP (Bootstrap Protocol)
CGMP (Cisco Group Management Protocol) server support
CDP (Cisco Discovery Protocol) support on Ethernet ports
DHCP (Dynamic Host Configuration Protocol) Relay
HSRP (Hot Standby Routing Protocol) over 10/100 Ethernet, Gigabit Ethernet, FEC, GEC, and BVI
(Bridge-Group Virtual Interface)
ICMP (Internet Control Message Protocol)
IGMP (Internet Group Management Protocol)
IPX SAP (Internet Packet Exchange Service Advertisement Protocol) and SAP filtering
IRB (integrated routing and bridging) routing mode support
SNMP (Simple Network Management Protocol)
Maximum of 32 active bridge groups with BVI
Route filtering
ISL support on the GEC
802.1 routing support on the GEC
Group Virtual Interface (BVI)
Support for up to 200 IPX networks on interfaces and subinterfaces
1-port packet-over-SONET OC-12c uplink port adapter with built-in ACL functionality and a 1-port
enhanced Gigabit Ethernet port adapter
IS-IS routing protocol
Switching database manager
ATM uplink: F4 and F5 flows of OAM cells
ATM uplink: Traffic shaping
Table 15 Packet-over-SONET (POS) Feature Set Supported by the Catalyst 8540 CSR (continued)
Packet-over-SONET (POS)