Specifications

Samsung Electronics
Service Manual
System Overview
3-4
3.1.3.3 Driver Ass’y
MAIN Motor ass’y is for Cassette,MPF and Toner Cartridge
EXIT Motor ass’y is for fuser,exit roller and the initial duplexing feeding
DUPLEX Motor ass’y is for duplexing feeder on SCX-5530FN only
3.1.3.4 Fuser Ass’y
Fusing Type : [ Halogen Lamp( R2) E-Coil type ( Elbert) / Halogen Lamp(Dove) ]
Heat Roller : [ 28.3 with 0.1 Clown ]
Pressure Roller : [electrically conductive]
Thermistor - Temperature Detecting Sensor
Thermostat - Overheat Protection Device
Trouble Temperature Control concept
Open Heat Error 90
below for 45 sec at Warm up
Over Heat Error 230 over for 10 sec
or 240
over for 5 sec
Low Heat Error Standby :130 below for 10 sec
Printing : 35 below for 7 sec
at consecutibve 2 page printing.