Specifications

Disassembly and Reassembly
Samsung Electronics
Service Manual
5-33
6. If necessary, release the three E-Rings securing the
Gears (T2 Idle, Retard, Idle) and then remove the
Gears from the Feed Bracket, as shown below.
Notice : Be aware of the E-Rings to ensure they are not
lost.
7. Remove the Clutch Unit, as shown below.
8. Pull up the Feed1 Roller from the Bushing, as shown
below.
Notice : Do not grab the rubber part of the Feed1 Roller,
it may cause a malfunction due to a foreigen
object.
T2 Idle Gear
Retard Gear
Idle Gear
E-Ring
Bracket
Feed Shaft
Feed1 Gear Ass'y
Clutch Unit
Feed1 Roller