Specifications

Samsung Electronics
Service Manual
Disassembly and Reassembly
5-32
5.24 Feed Roller Parts
1. Before you remove the Feed Roller Parts, you should
remove:
- Pick Up Roller Ass'y (Refer to 5.18)
- Duplex Guide Housing (Refer to 5.19)
- Middle Cover Ass'y (Refer to 5.21)
- MPF Housing (Refer to 5.23)
2. Remove the two screws securing the both side of the
Plate Push Bushing and then remove the Guides.
3. Pull up the Feed Idle Shaft and the Bushs (with
Spring).
4. Release the E-Ring securing the Feed2 Gear and
remove it.
5. Remove the three screws securing the Feed Bracket
Unit and then remove the Feed Bracket Unit and
Feed2 Shaft.
Plate Push Bushing
Feed Idle Shaft
Bush
Spring
Feed2 Gear
E-Ring
Feed2 Shaft
Feed Bracket Unit