Specifications

Disassembly and Reassembly
Samsung Electronics
Service Manual
5-31
5.23 MPF Housing
1. Before you remove the MPF Housing, you should
remove:
- Cover Mid Front (Refer to 5.22)
2. Remove the four screws securing the MPF Housing
and remove it.
3. To remove the MP Pick Up Ass'y, first lift the notch
attached to the left side Stopper so that it's slide the
right to left from the Shaft, then left side Idle slid the
right to left from the Shaft and take out the MP Pick
Up Ass'y, as shown below.
Notice : Do not grab the rubber part of the Feed1 Roller,
it may cause a malfunction due to a foreigen
object.
MPF Housing
Stopper
1
2
Idle
MP Pick Up Ass'y
MPF Housing