Specifications

Disassembly and Reassembly
Samsung Electronics
Service Manual
5-19
1. Before you remove the Shield Controller Ass'y, you
should remove:
- Side Cover Left (Refer to 5.7.4)
2. Unplug the all connectors and remove the one screw
securing the Ground Cable.
3. Remove the five screws securing the Shield Controller
Ass'y and remove it.
4. Remove the five screws securing the Main PBA to the
Shield and unplug the Film Cable and then remove
the Main PBA.
5. The connectors are located, as shown below.
5.11 Shield Controller Ass'y
Shield Controller Ass’y
Shield
Film Cable
Main PBA
ADF Flat Motor
Flat Cover
CCD
OPE Panel
USB Host
Cartridge
USB
Port
Modem PBA
Duplex Moto
r
Engine
BLDG
Pick Up
REGI
LSU_5V
LSU
MPF_SEN
MPF
Thermistor
Network
Port
Parallel
Port
SCF Con