Specifications

Samsung Electronics
Service Manual
Disassembly and Reassembly
5-18
14. Unlatch the Open Sensor and remove it, as shown
below.
15. Remove the CCD Holder.
16. Unplug the Harness from the CCD Home Sensor
and release the CCD Home Sensor, as shown
below.
Caution : Reassembling CCDM
1) When refitting the Scanner Belt and Belt
Spring take care to relocate the tension
spring as close to the right side of the
CCDM as is possible, as shown below.
2) When refitting the Scan Upper Cover take
care to ensure that the Cover Open Switch
is not trapped.
Sensor Lever
Open Sensor
CCD Holder
CCD Home Sensor
Harness