Specifications

Samsung Electronics
Service Manual
Disassembly and Reassembly
5-16
6. Release the six hooks securing the Scan Upper to the
Scan Lower and remove it, as shown below.
7. Remove the CCD Cable, as shown below.
Notice: You should connector remove the CCD Cable
vertically to avoid the CCD Cable pin damage.
8. Pull up the CCD Shaft and take out the CCDM.
9. Squeeze the spring to release the tension in the Belt
and lift from the pulleys, as shown below.
Scan Upper
Scan Lower
CCD Cable
Core
CCDM
CCD Shaft
Belt
Spring