Datasheet

© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 12 of 18
Feature Specification
Operating conditions (Cisco
819HG only)
Noncondensing humidity: 95%
IP 41 per IEC 60529 for Vertical Falling Water
Pollution 3 for Dust
Operational Vibration
MIL-STD-810G 2.2.1 Category 4; truck transportation over U.S. highways-restrained cargo
EN61373 functional random vibe - category 1, class B
SAE J1455 operating random vibe cap mounted truck
SAE J1455 Operating Sinusoidal Vibration, Category 3
Nonoperational Vibration
MIL-STD-810G 2.3.9 Category 20 - Ground vehicles
EN61373 simulated non-op long-life vibe - category 1, class B
SAE J1455 Nonoperating Sinusoidal Vibration, Category 3
Operational Shock
MIL-STD-810G 2.2.2 Procedure 1, Functional Shock
Nonoperational Shock
MIL-STD-810G 2.2.2 Procedure 5, Crash Hazard
MIL-STD-810G 2.2.2 Procedure 6, Bench Handling
EN61373 non-op shock class B
SAE J1455 4.11.3.1 Handling test
Power specifications AC Power Adapter
Maximum power consumption: 25W
Meets efficiency Level V
Input voltage and currents supported: 100–264 VAC <0.5A
Maximum output power rating: 20W
For IP 41 need additional enclosure
DC Power Adapter*
Maximum power consumption: 26W
Input voltage and currents supported: 10 VDC minimum, 13.8 VDC nominal, 36 VDC maximum operating, and
42 VDC absolute maximum
Maximum output power rating: 20W
IP 41 compliant
*Available Q1CY2012
Table 5. Antenna Specifications
Product Description
Included antenna Two multiband swivel-mount dipole antennae are included with all Cisco 819 ISRs
Diversity (dual antennae)
C819(H)G-U-K9: Diversity supported
C819(H)G-x-K9: Diversity supported
Antenna 3G-ANTM1919D Description
Multiband swivel-mount dipole antenna
Faceplate mount (two unist included with all Cisco 819 ISRs)
Electrical Specifications
Frequency range: 806 to 960 MHz and 1710 to 2170 MHz
Gain: 0 decibels relative to isotropic (dBi) (806 to 960 MHz) and 0 dBi (1710 to 2170 MHz)
Maximum power: 25W
Connector: TNC male
Voltage standing wave ratio (VSWR): <2.5:1
Nominal impedance: 50 ohms
Mechanical Specifications
Antenna dimensions: 7.63 x 0.94 x 0.63 in. (19.37 x 2.34 x 1.59 cm)
Temperature rating: –22 to 158°F (–30 to 70°C)