Datasheet

Cisco 7200-I/O-GE+E and Cisco 7200-I/O-2FE/E Input/Output Controllers
show interfaces gigabitethernet
13
Cisco IOS Release 12.1(3a)E
show interfaces gigabitethernet
To check the status and configuration settings of the Gigabit Ethernet interface of the
Cisco 7200-I/O-GE+E, use the show interfaces gigabitethernet privileged EXEC command.
show interfaces gigabitethernet slot/port
Syntax Description
Defaults No default behavior or values.
Command Modes Privileged EXEC
Command History
Usage Guidelines This command is used on the Cisco 7200-I/O-GE+E to display the configuration status of the
Gigabit Ethernet interface. Slot 0 is always reserved for the Gigabit Ethernet port on the I/O controller.
slot Slot number on the interface.
port Port number on the interface.
Release Modification
11.1 CC This command was introduced.
12.1(3a)E Support for the Cisco 7200-I/O-GE+E controller was introduced.