Specifications

ManualsBrandsCisco ManualsHome building and DecorC7200-I - Input/Output Controller - Control Processor

12 Input/Output Controller Replacement Instructions

Installation Prerequisites

• An 8-mm wrench or nut driver, or adjustable wrench (for connecting a grounding lug to a

Cisco uBR7200 series DC-input power supply)

• A 7-mm wrench or nut driver, or adjustable wrench (for connecting the DC-input power lead

strain-relief cover to a DC-input power supply)

• Tape (for securing the switch handle of a DC circuit breaker in the OFF position)

• Your own ESD-prevention equipment or the disposable grounding wrist strap included with all

upgrade kits, FRUs, and spares

• An antistatic mat or surface, or static-shielding bag

• Small pliers

Software and Hardware Requirements

Table 5 lists the recommended minimum Cisco IOS software release to use the I/O controller in

supported router platforms.

Table 5 I/O Controller Software and Hardware Requirements

Router Platform I/O Controller

With Fast Ethernet Port

(Single MII Receptacle)

With Fast Ethernet Port

(MII and RJ-45 Receptacles)

Without Fast Ethernet Port

Cisco 7200 series

• Cisco 7204VXR and

Cisco 7206VXR

Cisco IOS Release 12.0(3)T or later releases of 12.0 T

Cisco IOS Release 12.0(2)XE2 or later releases of 12.0 XE

• Cisco 7204 and

Cisco 7206

Cisco IOS Release 11.1(17)CA or later releases of 11.1CA

Cisco IOS Release 11.2(12)P or later releases of 11.2P

Cisco IOS Release 11.3(2)T or later releases of 11.3 T

Cisco IOS Release 11.3(2)AA or later releases of 11.3 AA

• Cisco 7202

1 You can install an I/O controller with or without a Fast Ethernet port in a Cisco 7202; however, when you install an I/O controller with a Fast Ethernet port, the

Cisco 7202 system software automatically disables the port.

Cisco IOS Release 11.1(19)CC1 or later releases of 11.1 CC

Cisco IOS Release 11.3(4)AA or later releases of 11.3 AA

• Cisco 7206 router shelf

2 The Cisco 7206 can be used as a router shelf in a Cisco AS5800 Universal Access Server. For information about the Cisco AS5800 Universal Access Server,

refer to the Cisco AS5800 Universal Access Server documentation listed in the “If You Need More Information” section on page 2.

Cisco IOS Release 11.3(2)AA or later releases of 11.3 AA

Cisco uBR7200 series

universal broadband routers

3 If you need to order a spare I/O controller for a Cisco uBR7200 series router, use the product number UBR7200-I/O-FE= (with Fast Ethernet port) or

UBR7200-I/O= (without Fast Ethernet port). These I/O controllers have the Cisco uBR7200 series boot helper image loaded on the Flash SIMMs.

–

4 Initial shipments of Cisco uBR7246 chassis that were equipped with a Fast Ethernet I/O controller might have an I/O controller with the single MII receptacle

installed. These I/O controllers are fully compatible with the router. If you need to order a spare I/O controller, use the product numbers described in the previous

footnote.

Cisco IOS Release 11.3(6)NA or later releases of 11.3 NA