Specifications

Contents
v
Cisco 7200 VXR Installation and Configuration Guide
OL-5013-08
Installing the Brackets on the Front of the Chassis 3-8
Installing the NPE-G1 and NPE-G2 Cable-Management Brackets on a Front-Mounted
Router
3-9
Installing the NPE-G1 and NPE-G2 Optical Cable-Management Bracket 3-11
Installing the Brackets on the Rear of the Chassis 3-11
Installing the NPE-G1 and NPE-G2 Cable-Management Brackets on a Rear-Mounted
Router
3-13
Installing the Chassis in the Rack 3-14
General Tabletop or Workbench Installation 3-14
Installing the Cable-Management Brackets 3-15
Securing the Port Adapter Cables 3-16
Attaching a Chassis Ground Connection 3-17
Connecting Port Adapter Cables 3-19
Connecting I/O Controller, NPE-G1, or NPE-G2 Cables 3-19
Connecting to Gigabit Ethernet Slots and Ports 3-19
Gigabit Ethernet SFP Module Connections 3-20
Mode-Conditioning Patch Cord Description 3-23
Gigabit Ethernet GBIC Connections 3-24
GBIC Cabling and Connection Equipment 3-26
Mode-Conditioning Patch Cord Description 3-28
Gigabit Ethernet RJ-45 Connections on the NPE-G1 and NPE-G2 3-29
Connecting to the I/O Controller Ethernet and Fast Ethernet Ports 3-30
Ethernet and Fast Ethernet RJ-45 Connections 3-30
Fast Ethernet MII Connections 3-33
Connecting to the Console and Auxiliary Ports 3-34
DB-25 Port Cabling and Pinouts 3-35
RJ-45 Port Cabling and Pinouts 3-37
Connecting Power 3-41
Connecting AC-Input Power 3-42
Connecting DC-Input Power 3-42
CHAPTER 4 Observing System Startup and Performing a Basic Configuration 4-1
Checking Conditions Prior to System Startup 4-1
Starting the System and Observing Initial Conditions 4-2
Configuring a Cisco 7200 VXR Router 4-3
Performing a Basic Configuration Using AutoInstall 4-4
Performing a Basic Configuration Using the Setup Facility 4-4
Configuring Global Parameters 4-5
Configuring the Native Gigabit Ethernet Interfaces 4-8