Datasheet
Table Of Contents
- Cisco Symmetric High-Bitrate DSL High Speed WAN Interface Cards for Cisco Integrated Services Routers
- Overview
- Feature Summary
- System Requirements
- Cisco Integrated Services Router with G.SHDSL HWIC Applications
- Differentiated Service Offerings through IP and ATM QoS
- Converged Platform for Small to Medium-Sized Business and Enterprise Branch€Applications
- G.SHDSL Feature Comparison between HWICs and WICs
- Data Rates Supported with 2- and 4-Pair G.SHDSL HWIC
- ATM Features and Benefits Summary
- Interoperability
- Platform Support
- Maximum G.SHDSL High-Speed WAN Interface Cards per Platform
- Software Requirements
- Product Number and Ordering Information
- 2- and 4-Pair G.SHDSL HWIC Hardware Specifications
- Safety, EMC, Telecom, Network Homologation, Power, Environmental Requirements, and Regulatory Approvals
- Country Support
Data Sheet
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 7 of 8
Table 8 gives product ordering information.
Table 8. Ordering Information
Product Number Description
HWIC-2SHDSL, HWIC-2SHDSL= 2-pair G.SHDSL HWIC (spare & system)
CISCO1841-2SHDSL 1841 2-pair G.SHDSL bundle, HWIC-2SHDSL, IP Base, 64F/128D
C2801-2SHDSL/K9 2801 2-pair G.SHDSL bundle, HWIC-2SHDSL, SP Services, 64F/192D
C2811-2SHDSL/K9 2811 2-pair G.SHDSL bundle, HWIC-2SHDSL, SP Services, 64F/256D
HWIC-4SHDSL, HWIC-4SHDSL= 4-pair G.SHDSL HWIC w IMA (spare & system)
CISCO1841-4SHDSL 1841 4-pair G.SHDSL bundle, HWIC-4SHDSL, IP Base, 64F/128D
C2801-4SHDSL/K9 2801 4-pair G.SHDSL bundle, HWIC-4SHDSL, SP Services, 64F/192D
C2811-4SHDSL/K9 2811 4-pair G.SHDSL bundle, HWIC-4SHDSL, SP Services, 64F/256D
C2821-4SHDSL/K9 2821 4-pair G.SHDSL bundle, HWIC-4SHDSL, SP Services, 64F/256D
2- and 4-Pair G.SHDSL HWIC Hardware Specifications
Table 9 gives product hardware specifications.
Table 9. Hardware Specifications
HWIC-2SHDSL HWIC-4SHDSL
G.SHDSL chipset Infineon Infineon
Dimensions Width: 2.80 inches
Height:.702 inches
Depth: 4.046 inches
Width: 2.80 inches
Height:.702 inches
Depth: 4.046 inches
Firmware Version Ver 1.1-1.5.0__004 Ver 1.1-1.5.0__004
Weight 0.18 lb 0.22 lb
LEDs One HWIC OK LED; two Link Status
LEDs (one LED per physical link pair)
Link Status LED color coding:
Green–Link On/Active
Off–Link Disabled
Blinking–Link Training/Link Alarm
One HWIC OK LED; four Link status
LEDs (one LED per physical link pair)
Link Status LED color coding:
Green–Link On/Active
Off–Link Disabled
Blinking–Link Training/Link Alarm
Ports Single RJ-11/RJ-14 connector Single RJ-45 connector
Cabling RJ-11 line cord RJ-45 to dual RJ-11 breakout line cord
NEBS compliance No No
Safety, EMC, Telecom, Network Homologation, Power, Environmental
Requirements, and Regulatory Approvals
When installed in a Cisco 1800, 2800, or 3800 Series Router, the 2- and 4-pair G.SHDSL HWICs
(HWIC-2SHDSL and HWIC-4SHDSL) do not change the standards (safety, EMC, telecom,
network homologation, power, environmental requirements, and regulatory approvals) of the router
itself. Refer to the Cisco 1800, 2800, and 3800 data sheets for additional information about
mechanical, environmental, and agency certifications.
●
For Cisco 1800 Series (modular):
http://www.cisco.com/en/US/prod/collateral/routers/ps5853/product_data_sheet0900aecd8
016a59b.html
●
For Cisco 2800 Series:
http://www.cisco.com/en/US/products/ps5854/index.html