Specifications

33-4
Cisco BPX 8600 Series Installation and Configuration
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001
Chapter 33 AT3-6ME (T3 to T2) Interface Adapter
Equipment Description
DIP Switches
The adapter has two front panel DIP switches:
• a two-position (SW-1)
This controls the configurations that may interruptoperation and should be done through a two-step
operation.
• a 12-position (SW-2) switch
This enables all other configuration parameters.
T3/T2 loop Red Indicates the unit is in loop back mode, external toward
the T3 and T2 line interfaces.
Active/Fail Green/Re
d
Upon power up the system will go through extensive
self tests. If self-test passes, the Active/Fail LED will be
green; if self-test fails the LED will be RED.
Power Green Power ON indication.
Table 33-2 Front Panel Indicators (continued)
Indicator Color Description