Specifications

32-6

Cisco BPX 8600 Series Installation and Configuration

Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001

Chapter 32 BPX Switch Cabling Summary

External Alarm Cabling

This cable (Table 32-16) is for connecting network alarm outputs to the LM-ASM ALARM OUTPUT

connector only. Table 32-17 lists the pinouts for the network alarm outputs.

Table 32-13 E1 Connection 75 Ohm to EXT TMG on BCC-bc or BCC-3-bc

Connector Description

BNC Receive E1 from trunk

Table 32-14 E1 Connection 100/120 Ohm to EXT TMG on BCC-bc

Pin # Description

2 Receive pair shield

3 Receive tip

11 Receive ring

Table 32-15 E1 Connection 100/120 Ohm to EXT 1 or EXT 2 on BCC-3-bc

Pin # Description Function

1 Transmit tip Transmit T1 timing signal synchronized to the node

2 Transmit pair shield

3 Receive tip Receive clock for synchronized clock source for node

4 Receive pair shield

7 Transfer timing tip

8Transfertimingshield

9Transmitring

11 Receive ring

15 Transfer timing ring

Table 32-16 External Alarm Cabling

Cable Parameter Description

Interface: Dry-contact relay closure

Wire: 24 AWG, shielded, 6-pair

Connector: DB-15, Subminiature, male