Specifications

32-5
Cisco BPX 8600 Series Installation and Configuration
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001
Chapter 32 BPX Switch Cabling Summary
LM-BCC Cabling
E1 Clock Cabling
Table 32-12 through Table 32-15 lists E1 clock cabling details.
2 Transfer timing tip
3&4 Transfertimingshield
Table 32-10 T1 Connection to EXT TMG on BCC-bc
Pin # Description
2 Receive pair shield
3 Receive tip
11 Receive ring
Table 32-11 T1 Connection to EXT 1 or EXT 2 on BCC-3-bc
Pin # Description Function
1 Transmit tip Transmit T1 timing signal synchronized to the node
2Transmitpairshield
3 Receive tip Receive clock for synchronized clock source for node
4 Receive pair shield
7 Transfer timing tip
8Transfertimingshield
9Transmitring
11 Receive ring
15 Transfer timing ring
Table 32-9 T1 Connection to XFER TMG on BCC-bc (continued)
Pin # Description
Table 32-12 E1 Connector Pin Assignments for External Clock
Connector Description
Cable Type: 75-ohm coax cable for unbalanced connection or 100–120-ohm
twisted pair for balanced connection. Two cables/pairs (1 transmit,
1 receive) per E1 line.
Cable Connector: Two female BNC for unbalanced connection; male DB15 for
balanced connection. See Table 32-13 and Table 32-15 for pinouts.
Max. Cable Length: Approx. 100 meters maximum between the BPX switch and the first
repeater or CSU. Equalizer for cable length.