Specifications

26-15
Cisco BPX 8600 Series Installation and Configuration
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001
Chapter 26 Configuring SONET Automatic Protection System
APS Command Summary
Table 26-7 APS Commands
Command Description
New Commands Added for Management of APS
cnfcdaps slot Sets APS options on the card.
addapsln slot1.port1 slot2.port2 protocol Adds APS.
delapsln slot.port Deletes APS.
dspapsln Displays status of APS line pairs.
switchapsln slot.port (option 1...6, S) Controls the APS user switching interface.
cnfapsln slot.port Configures the APS parameters on a line.
New Commands for Card Redundancy for APS 1+1
addcdred Adds redundancy across two cards.
dpscdred Display redundant cards.
delcdred Deletes redundancy configuration for cards.
switchcdred Switches active and redundant cards.
Commands modified for use with APS
cnfbkcd Modified to APS options.
dspalms Added row for “APS Alarms” which lists Minor and
Major APS alarms.
dspcd Displays front and backcard APS attributes. For the front
card, displays that card supports APS 1+1 and APS 1:1.
For the back card, displays if backcard is a redundant
backcard, and if so, the slot number of the redundant
backcard. Also, displays APS mismatch conditions.
dspsv3 Modified to display APS alarms pending.
dsplog Displays APS alarms.
addyred Modified to prevent invalid configurations when
combined with APS.
delyred Modified to prevent invalid configurations when
combined with APS.