Specifications

24-11
Cisco BPX 8600 Series Installation and Configuration
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001
Chapter 24 Configuring BXM Virtual Circuits
Command Line Interface Examples
pubsbpx1 TN StrataCom BPX 8620 9.3 March 2 2000 14:12 PDT
From Remote Remote Route
2.2.17.17 NodeName Channel State Type Avoid COS O
2.3.66.66 pubsbpx1 2.2.16.16 Ok rt-vbr
This Command: addcon 2.2.17.17 pubsbpx1 2.3.67.67 abrstd 100/100 95/95**eee
d 70/70*3***65/65 * * ******
Add these connections (y/n)? y
An example of the cnfcon command for an ABR connection:
pubsbpx1 TN silves BPX 8620 9.3 March 2 2000 14:14 PDT
Conn: 2.2.17.17 pubsbpx1 2.3.67.67 abrstd Status:OK
PCR(0+1) % Util MCR CDVT(0+1) AAL5 FBTC VSVD FCES
100/100 95/95 50/50 250000/250000 y y y
SCR MBS Policing VC Qdepth CLP Hi CLP Lo/EDP EFCI
70/70 1000/1000 3 16000/16000 80/80 35/35 65/65
ICR ADTF Trm RIF RDF Nrm FRTT TBE
50/50 1000 100 128 16 32 0 1048320
This Command: cnfcon 2.2.17.17
PCR(0+1) [100/100]:
An example of the cnfabrparm command: