Specifications

24-10
Cisco BPX 8600 Series Installation and Configuration
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001
Chapter24 Configuring BXM Virtual Circuits
Command Line Interface Examples
pubsbpx1 TN silves BPX 8620 9.3 March 2 2000 14:05 PDT
Local Remote Remote Route
Channel NodeName Channel State Type Avoid COS O
2.2.16.16 pubsbpx1 2.3.66.66 Ok rt-vbr
2.3.66.66 pubsbpx1 2.2.16.16 Ok rt-vbr
Last Command: addcon 2.2.16.16 pubsbpx1 2.3.66.66 rt-VBR*******
Next Command:
An example of the cnfcon command for a rt-VBR connection 2.2.16.16.
pubsbpx1 TN silves BPX 8620 9.3 March 2 2000 14:06 PDT
Conn: 2.2.16.16 pubsbpx1 2.3.66.66 rt-vbr Status:OK
PCR(0+1) % Util CDVT(0+1) AAL5 FBTC SCR
50/50 100/100 250000/250000 n 50/50
MBS Policing
1000/1000 3
This Command: cnfcon 2.2.16.16
PCR(0+1) [50/50]:
An example of the addcon command for an ABR connection follows. In this case, the choice to accept
the default parameters was not accepted, and individual parameters were configured for a connection
using ABR standard VSVD flow control.