Specifications

24-7
Cisco BPX 8600 Series Installation and Configuration
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001
Chapter 24 Configuring BXM Virtual Circuits
Command Line Interface Examples
pubsbpx1 TN StrataCom BPX 8620 9.3 Aug. 2 2000 13:55 PDT
LN 2.2 Config OC-3 [353208cps] BXM slot: 2
Loop clock: No Idle code: 7F hex
Line framing: --
coding: --
CRC: --
recv impedance: --
E1 signalling: --
encoding: -- cable type: --
T1 signalling: -- length: --
HCS Masking: Yes
Payload Scramble: Yes
56KBS Bit Pos: -- Frame Scramble: Yes
pct fast modem: -- Cell Framing: STS-3C
VC Shaping: No
This Command: cnfln 2.2
Loop clock (N):
An example of the cnfport command for port 3 of a BXM card in slot 3:
pubsbpx1 TN silves BPX 8620 9.3 March 2 2000 13:56 PDT
Port: 2.2 [INACTIVE]
Interface: LM-BXM CAC Override: Enabled
Type: UNI %Util Use: Disabled
Shift: SHIFT ON HCF (Normal Operation)
SIG Queue Depth: 640 Port Load: 0 %
Protocol: NONE Protocol by Card: No
This Command: cnfport 2.2
NNI Cell Header Format? [N]: