Specifications

23-36
Cisco BPX 8600 Series Installation and Configuration
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001
Chapter 23 Configuring BXM Virtual Switch Interfaces
Class of Service Templates and Qbins
Qbin Default Settings
The qbin default settings are shown in Table 23-13. The Service Class Template default settings for
Label Switch Controllers and PNNI controllers are shown in Table 23-14
Note: Templates 2, 4, 6, and 8 support policing on PPD
.
Table 23-13 Qbin Default Settings
QBIN
Max Qbin Threshold
(usec) CLP High
CLP
Low/EPD EFCI
Discard
Selection
LABEL
Template 1
10 (Null, Default, Signalling, Tag0,4) 300,000 100% 95% 100% EPD
11 (Tag1,5) 300,000 100% 95% 100% EPD
12 (Tag2,6) 300,000 100% 95% 100% EPD
13 (Tag3,7) 300,000 100% 95% 100% EPD
14 (Tag Abr) 300,000 100% 95% 6% EPD
15 (Tag unused) 300,000 100% 95% 100% EPD
PNNI
Templates 2 (with policing) and 3
10 (Null, Default, CBR) 4200 80% 60% 100% CLP
11 (VbrRt) 53000 80% 60% 100% EPD
12 (VbrNrt) 53000 80% 60% 100% EPD
13 (Ubr) 105000 80% 60% 100% EPD
14 (Abr) 105000 80% 60% 20% EPD
15 (Unused) 105000 80% 60% 100% EPD
Full Support for ATMF and reduced support for Tag CoS without Tag-Abr
Templates 4 (with policing) and 5
10 (Tag 0,4,1,5, Default, UBR,
Tag-Abr
*
)
300,000 100% 95% 100% EPD
11 (VbrRt) 53000 80% 60% 100% EPD
12 (VbrNrt) 53000 80% 60% 100% EPD
13 (Tag 2,6,3,7) 300,000 100% 95% 100% EPD
14 (Abr) 105000 80% 60% 20% EPD
15 (Cbr) 4200 80% 60% 100% CLP
Full Support for Tag ABR and ATMF without Tag CoS
Templates 6 (with policing) and 7
10 (Tag 0,4,1,5,2,6,3,7 Default, UBR) 300,000 100% 95% 100% EPD
11 (VbrRt) 53000 80% 60% 100% EPD
12 (VbrNrt) 53000 80% 60% 100% EPD
13 (Tag-Abr) 300,000 100% 95% 6% EPD
14 (Abr) 105000 80% 60% 20% EPD