Specifications

23-34
Cisco BPX 8600 Series Installation and Configuration
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001
Chapter 23 Configuring BXM Virtual Switch Interfaces
Class of Service Templates and Qbins
Note Every service class does not have a value defined for every parameter listed in Table 23-11
below.
Table 23-11 Connection Parameter Descriptions and Ranges
Object Name Range/Values Template Units
QBIN Number 10 – 15 qbin #
Scaling Class 0 – 3 enumeration
CDVT 0 – 5M (5 sec) secs
MBS 1 – 5M cells
ICR MCR – PCR cells
MCR 50 – LR cells
SCR MCR – LineRate cells
UPC Enable 0 – Disable GCRAs
1 – Enabled GCRAs
2 – Enable GCRA #1
3 – Enable GCRA #2
enumeration
UPC CLP Selection 0 – Bk 1: CLP (0+1)
Bk 2: CLP (0)
1 – Bk 1: CLP (0+1)
Bk 2: CLP (0+1)
2 – Bk 1: CLP (0+1)
Bk 2: Disabled
enumeration
Policing Action (GCRA #1) 0 – Discard
1 – Set CLP bit
2 – Set CLP of
untagged cells,
disc. tag’d cells
enumeration
Policing Action (GCRA #2) 0 – Discard
1 – Set CLP bit
2 – Set CLP of
untagged cells,
disc. tag’d cells
enumeration
VC Max cells
CLP Lo 0 – 100 %Vc Max
CLP Hi 0 – 100 %Vc Max
EFCI 0 – 100 %Vc Max